 |
 |
 |
|
|
|
3VS - 3hp - Road Racing / IRL / CART
|
The 3VS is a fully computer controlled, variable motor speed model. The
3VS is identical to our most popular model, the 5VS, with a 3 HP motor
replacing the 5 Hp of the 5VS. This allows us to provide the fully
computer controlled, variable motor speed feature at a more cost
effective price. It is capable of testing at four specific English or
optional Metric stroke settings, up to 2 inches (50mm). The SHOCK™ Test
Control and Damper Analysis software enables you to perform static and
dynamic gas tests, temperature or time based warming of a damper, as
well as stop the 3VS at bottom dead center of the damper stroke. A
standard 3VS has force capacity up to +/- 2000 lbs. and damper
velocities up to +/- 39 inches per second with a 2-inch stroke.
Typical Motorsports Application
The 3VS is suitable for use by NASCAR Late Model, ASA, Sprint Cars,
Modifieds, SCCA Trans-Am, World Sports Car, European Touring Car and
other closed wheel racing teams for their race transporters. Completely
portable, the 3VS is well suited for use at the track or test sessions,
where quickly building and testing a damper is of primary importance to
a race team engineer or crew chief.
| |
| Spec Table: |
* 3 Hp Motor, 220 Volt, 10 amp single or three
phase.
* 4 Standard English Strokes: 2.0", 1.5", 1.0", 0.5"
* Computer controlled actuator frequency: .05Hz to 6 Hz
* Non-contact Infra Red Style Temperature Transducer.
* 48" Bright Nickel (rust-less) columns (28" / 700 mm eye to eye
test area).
* +/- 2000 lbs. Pancake Load Cell - Standard.
* 8 Channel Dynamometer Instrumentation Signal Conditioning
System.
* 16 bit resolution USB Data Acquisition standard.
* Full Computer Control with SHOCK™ Test Control and Damper
Analysis Software.
* Desktop / Notebook IBM PC Compatible.
3VS Damper Dyno Dimensions:
-3VS and 5VS Dimensions
|
| Options: |
- Various load cell configurations including: 500lb, 2,000lb and
5,000lb.
- 380-440 VAC option
- Longer columns, sold in 12" (305mm) increments
- 380-440 volt
- Metric Strokes: 50mm, 40mm, 25mm, 15mm or custom
-
Add on Spring Rater
-
Clevis Options
Add
on Spring Rater
LISTA Cabinet
|
General Product Information and Policies |
| |
|
PRICE (USD): |
|
|
|
|
|
|
|
