 |
 |
 |
|
|
|
SASC - Stand Alone Spring Checker
 |
This stand-alone machine is a versatile spring
test/rating station. The 10,000 lbs. maximum force hydraulic jack is
mounted into a rugged super-structure. Actuated by a hydraulic hand pump
(optional electric and pneumatic pumps available), the Stand Alone
Spring Rater is instrumented with a 5,000 lbs load cell and a
displacement sensor.
Our SPRING™ test and analysis software guides the user through test
creation and execution. After an initial user-defined compression,
SPRING™ software calculates hundreds of instantaneous spring rates
during a controlled release of the spring through the test and preload
ranges.
|
for a
Quote... |
| Spec Table: |
* Tests open- and closed-end springs.
* 7" testing range (12" option available)
* Pre-load range and test range are user definable in
displacement and/or force.
* Plots of: Displacement Vs. Spring Rate, Force Vs. Spring Rate,
and Displacement Vs. Force.
* Numerical reports at user-defined report intervals.
* Multiple plot overlays.
* User-definable pass/fail validation.
Stand Alone Dynamic Spring Rater Dimensions:
-Stand Alone Dynamic Spring Rater Dimensions
Spring Cups:
 |
 |
Standard Upper Cup:
Low Side Wall |
Optional Upper Cup
Designed for Helix Inserts |
| |
|
 |
 |
Optional Double Sided Upper
Aluminum Cup:
Flat Ground and 7/8" Helix |
|
| Options: |
- Various load cell configurations including: 500lb, 2,000lb and
5,000lb.
- Longer columns, sold in 12" (305mm) increments
- Air over hydraulic pump
- Electric over hydraulic pump
- Extra Stroke for a 12" Test range
- Lower stud for attaching clevis
|
General Product Information and Policies |
| |
|
PRICE (USD): |
|
|
|
|
|
|
|
